Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - EMS-HW50C Progressive Industries Install

bncinwv · 07-29-2010, 03:06 AM

On the advice of Progressive Industries, we had to bond the neutral and ground together on the input from the generator to the EMS. It can be done with a dedicated pig-tail or in our case, our rig came with the IOTA smartswitch and I bonded them together on the generator side of the switch. As a side note, I have a dedicated front receptacle that I use only for the generator hookup, so based on that I would say a dedicated bonded pigtail would be the route to go.
Bingo

07-29-2010, 03:06 AM	#8
bncinwv Montana Master Join Date: Feb 2007 Location: Winfield Posts: 7,327 M.O.C. #6846	On the advice of Progressive Industries, we had to bond the neutral and ground together on the input from the generator to the EMS. It can be done with a dedicated pig-tail or in our case, our rig came with the IOTA smartswitch and I bonded them together on the generator side of the switch. As a side note, I have a dedicated front receptacle that I use only for the generator hookup, so based on that I would say a dedicated bonded pigtail would be the route to go. Bingo __________________ Bingo and Cathy - Our adventures begin in the hills of WV. We are blessed by our 2014 3850FL Big Sky (previous 2011 3750FL and 2007 3400RL) that we pull with a 2007 Chevy Silverado Classic DRW CC dually.