[jeffba]

Originally Posted by PNW Fireguy

This is another mod I have been interested in performing. I am not sure it if was ever offered as a option on the 2015 3440RL models however the street side read panel looks like it is suitable for fitting the reel and is adjacent to the power connection in the rear cap. I have looked at all the information I could find online regarding the CS12D-SR and it appears to a bolt on add-on. On the 3440RL floor plan the fresh water tank is on the opposite side of the frame where the reel would be bolted. My question or concern for anyone in the know is how close is the tank on the other side of the frame to the frame? I will need to drill the frame for the bolts and need access to place hardware on the opposite side. I know I could drop the corroplast but I only want to do it once when the time comes to install. I have never dropped the underbelly and from what I have gathered here on the forum it's at best no fun and at worse could be a bit of a can of worms regarding the fasteners. Thanks.

The corroplast is only hard when you first drop it and reinstall. Removing the nails and replacing with screws takes a bit of extra effort. After the screws are in it it pretty easy and servicable.