Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

noneck · 10-01-2006, 04:23 PM

Hi MOC-1900,
When plugged into shore power how many volts do you read across the battery? Should be 13.5 vdc or higher. Wiring goes from battery through a automatic resetting relay...maybe you have a flaky one. When not connected to short power you should read 12 vdc across the white to red heavy gauge wires in the converter. I'll look inside my Montana tomorrow after work to see where this relay is located to better understand if the jacks and slides would work as you describe.

10-01-2006, 04:23 PM	#20
noneck Montana Master Join Date: Sep 2006 Location: Wappingers Falls Posts: 1,303 M.O.C. #6263	Hi MOC-1900, When plugged into shore power how many volts do you read across the battery? Should be 13.5 vdc or higher. Wiring goes from battery through a automatic resetting relay...maybe you have a flaky one. When not connected to short power you should read 12 vdc across the white to red heavy gauge wires in the converter. I'll look inside my Montana tomorrow after work to see where this relay is located to better understand if the jacks and slides would work as you describe.