Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

bncinwv · 10-27-2010, 08:57 AM

I have always placed mine on the frame to try to take the suspension bounce out of the rig. Haven't had a chance to use them on the new rig but on the 3400 I placed them just in front of the axles on the frame and just behind the axles on the frames as well. I would say that it took about 80-90% of the bounce out of the rig. I would also place blocks under the jack stands so that the screw extension would only be about 2-3 inches from the top of the jack stand itself. I would not think there would be as much benefit unless you were jacking the springs up to take the bounce out, but possibly.....
Bingo

10-27-2010, 08:57 AM	#4
bncinwv Montana Master Join Date: Feb 2007 Location: Winfield Posts: 7,327 M.O.C. #6846	I have always placed mine on the frame to try to take the suspension bounce out of the rig. Haven't had a chance to use them on the new rig but on the 3400 I placed them just in front of the axles on the frame and just behind the axles on the frames as well. I would say that it took about 80-90% of the bounce out of the rig. I would also place blocks under the jack stands so that the screw extension would only be about 2-3 inches from the top of the jack stand itself. I would not think there would be as much benefit unless you were jacking the springs up to take the bounce out, but possibly..... Bingo __________________ Bingo and Cathy - Our adventures begin in the hills of WV. We are blessed by our 2014 3850FL Big Sky (previous 2011 3750FL and 2007 3400RL) that we pull with a 2007 Chevy Silverado Classic DRW CC dually.