In your post you were asking "how to activate the Under Stair Light without the Scare Light being on". What I did was remove the under stair light fixture to find the color of the power wire running to it. I then removed the Main Switch panel in the Montana. The power is fed from the Door Side Scare Light Switch. I located the wire leading to the under stair light there and disconnected it.
Now at this point you can do 2 different things, 1) either add another switch for that light itself or... 2) Attach it to another light switch of your choice.
I attached mine to the switch for the Cap Lights. That helps finding my rig at night easier and also lights the stairs.
By the way.....I also added a motion light in place of the porch light and that helps a lot also!
Hope this make sense to you. If not PM me and I'll try again to better explain it. Good Luck! Scott
|