Quote:
Originally Posted by rohrmann
It really isn't too hard to replace them, but beware they may not work properly once you have them installed if you use the wire colors that the rig was wired with. I got ours installed, then had to pull them out and change the connections, as they had the two filaments of the old lights backwards. I also installed two reds on both sides, replacing the backup lights with the second red lights, and then installed white LED light bars on the bike hitch bar for the backup function. These are the lights I used. https://www.amazon.com/s?k=SET+OF+2+...ref=nb_sb_noss
|
Did you use a resistor ? My understanding is you need to install a resistor to keep them from hyper blinking when the directional is on.. just curious its a upgrade I'm considering too
Tony
__________________
2018 3920fb 2020 GMC Denali 3500 4x4 Duramax, 10 speed Allison. LB SRW, Firestone air bags with Airlift wireless onboard compressor. Anderson Ultimate Hitch. MX4 folding cover. 50gal titan in bed transfer tank. Onan 6500 lp genset installed by me ! Had: 2 HF 3500 Inverters with Parallel Kit
|