Quote:
Originally Posted by Chip
Ok, I cut the Coroplast and did not see the leak. Put 40 gallons in the tank and still did not see a leak. Did get some smell when draining a full sink though.
So the leak must be at or very near top so it must need to be over full to leak.
Going to try and make it home before I try and repeat the leak. I did support the tank while underneath.
|
The tank leaks of those model tanks were nearly always at the inlet of the tank this is why we learned to never let the tanks get full .We dump often. The model number will be on the tank. Just do not fill the tank and you will be ok.
The weight of the liquid in the tank will pull the inlet away from the tank at about half full you should be ok. That has been our experience.