[Mikendebbie]

I have a tailgater with dish service. Tailgater partially worked when connected to living room connection in docking station - by “partially” I mean that I got a picture but could not initiate a scan. The black box (VP211z) sends/recieves signals and commands back and forth but only partial signals were getting thru. I got a few channels but it only recognized 1 out of 3 stats. The scan command would not initiate. The only reason it was able to do that is because I had it set up and scanned with coax thru the window before I tried the docking station connection. Basically it was unwatchable. I had to run direct coax thru window using a white flat coax piece ($11 from camping world). Now it works but DW does not like the black coax dangling from window to tv. Basically if there is a splitter between tailgater and black box the system will not work.

Service tech at my dealer tells me there should be a splitter above and behind the docking station. I plan to test one cable at a time to find the living room cable. I will probably use the park cable connection - not the tailgater - to see which cable connects to the tv. This will avoid the dish system trying to rescan each time it is connected or disconnected during the test. Once I locate the direct link to living room tv I will connect tailgater to that cable and see if it scans and functions correctly. I plan to work on it this weekend if it doesn’t rain. I will let you know how it comes out.