[LDMoore06]

On our 2013 3150RL, the door side slide, which is the entertainment center and fireplace, is out of adjustment. In the closed position, the front side is out about a 1/4 to 1/2 inch further than rear. This is a single actuator and guide. It does look like the four nuts on the plate has moved a little. Lippert manual does not address single guide. Tomorrow, I'm going to take all my measurements and call Lippert. Dealer wanted to drop spare, remove underbelly, break weld and reweld actuator bracket. Told him no and picked it up. Very long story there. Anyone been through this on small slide. Thanks.