It takes me about 45 minutes to take a wheel off, clean and repack the bearings and add new grease seal and reinstall. From start to finish is about 4 hours which includes torquing the wheels and putting up all the tools and all wheels back on the ground. How can you inspect everything if you don't remove the wheels. I might add this also includes me having to remove the disc rotors which take longer than removing the drums. 4 hours a year can save you a lot of money and know it's done right. The old saying ' don't have time to do it right but have time to do it over' could apply here.EZ lube should be removed from all but boat trailer's as this was what they were designed for to start with.
|