Hi
We had to replace our basement floor because of rot.
The wood was 5/8 plywood and under that are aluminum cross members that are 2X2 inch theses may be 2X3 laid sideways.
At any rate you shouldn’t have any problem using 5/8 screws. If you hit one of the aluminum cross member it would probably strip the screw in the wood and all you would have to do is move it a few inches to get a good tight clamp.
Phil P
__________________
2009 Montana 3665RE
2009 Duramax 3500 DRW quad cab
personal web page https:// www.sallyscoffees.com
If you get a page not available then remove the "s" after HTTP
|