|
That was really the only thing I found using the search the function and after resealing it was not my issue.
I do think that I may have found it though! I believe that I have two issues.
1. The eternabond on the corner where the two pieces of angle come together was torn and after investigating found that water was finding its way beneath it.
2. I also believe that water is running/blowing its way between the swiper seal and the bottom seal where the small C channel elbows out.
I have fixed the eternabond and will monitor the other as I am not really sure how best to approach fixing it, besides cutting it as suggested and before doing so I want to verify it is a problem.
I appreciate everyones insight!!
|