Dave, one of my fixtures won't pull out of the wood very far...but I can put a finger on the side of the fixture to stop it from turning and then and I can twist the glass lens cover left (counter-clockwise) less than a third of a turn and the cover comes off to reveal the inside reflector and bulb. Glass lens cover should not be able to turn in a complete circle unless the whole fixxture is turning in a complete circle and twisting the wiring. Sounds like you need to pull the fixture out of the wood a little bit so you can stop the fixture from turning which will allow the lens to twist off. Of course, you could have the bad fixture that shouldn't have been installed in the first place...hope not. John
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|