Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jcurtis934 · 05-30-2015, 05:56 AM

Damworker, if you do a cut and paste of the info string on tiny pic where it says for posting on forums, your pic should show up here. So on tiny pic you would highlight the whole string that starts with a bracket and the word abreviation of image and ends with same...then do a control x on the keyboard to cut the image. Now switch over to your post and below your text, do a control v to paste that tiny pic string onto the forum. It looks like you didn't cut the whole string so the result is no picture showing up. Hope this helps you. John

05-30-2015, 05:56 AM	#14
jcurtis934 Montana Master Join Date: Sep 2013 Location: Pensacola (mail forward service) Posts: 3,198 M.O.C. #13740	Damworker, if you do a cut and paste of the info string on tiny pic where it says for posting on forums, your pic should show up here. So on tiny pic you would highlight the whole string that starts with a bracket and the word abreviation of image and ends with same...then do a control x on the keyboard to cut the image. Now switch over to your post and below your text, do a control v to paste that tiny pic string onto the forum. It looks like you didn't cut the whole string so the result is no picture showing up. Hope this helps you. John __________________ 2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.