Quote:
Originally Posted by scottz
Has anyone upgraded the tail/brake and backup lights on a legacy edition to LED's?
They are not the usual 4" grommet lights. I see two options:
1. Replace the entire light with the grommet style, but I have not removed one to measure the hole and see if that will work.
2. Replace the bulb. I'm looking for someone who has tried these bulbs and tell me if they are an improvement. On the tail/brake, is there a good difference between the brightness when the brakes come on?
I'll also replace the clearance lights with LED's. Hard to believe a unit in this price range does not have LED's.
Replacement bulbs:
https://www.amazon.com/dp/B01H54SP6O...=20WCH34BQL5LH
https://www.amazon.com/dp/B01H55JGMU...=20WCH34BQL5LH
Replacement lights:
https://www.amazon.com/dp/B00M4OCEPY...=20WCH34BQL5LH
Here's a photo of the OEM lights. |
I replaced ALL of the outside clearance and tail/backup lights. Given a do-over I would likely eliminate the backup lights and go with 4 tail/brake lights.
It's a very easy project. However; one may be tepted to try some of the new thinner lamps, but Keystone uses the same 1-1/8" drill bit they use for EVERYTHING else and the fixture won't cover the hole. Also your lights require 2 wires, many replacements have only one.
here are the clearance lights I used
https://truckchrome.com/shop/marker-...roduct_id=1718
from this place local to me but they do online sales as well.
https://truckchrome.com/shop/
Mark