Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

prndl · 09-16-2018, 03:14 PM

Thanks Dave but everything is where it should be. Except the caliper

The rotor is exact. The bearing shoulder is exact. The face of the hub to the axle flange is exact. And seven other measurements taken from the Kodiak HRCM-133-7-8 Section View are right on.

If I had a 1/4" spacer between the axle flange and the caliper mount I would be gold. I think the caliper mount is made wrong as it is the only thing that doesn't measure right.

And yes, Standard #42 axle with 12X2" brakes and 8 lug 1/2" wheels with 25580 inner and 14125A outer bearings is a 7K axle on a 2955RL

09-16-2018, 03:14 PM	#5
prndl Montana Master Join Date: Apr 2017 Location: 1000 oaks Posts: 949 M.O.C. #19630	Thanks Dave but everything is where it should be. Except the caliper The rotor is exact. The bearing shoulder is exact. The face of the hub to the axle flange is exact. And seven other measurements taken from the Kodiak HRCM-133-7-8 Section View are right on. If I had a 1/4" spacer between the axle flange and the caliper mount I would be gold. I think the caliper mount is made wrong as it is the only thing that doesn't measure right. And yes, Standard #42 axle with 12X2" brakes and 8 lug 1/2" wheels with 25580 inner and 14125A outer bearings is a 7K axle on a 2955RL __________________ 2011 2955RL Gen-Y Executive Kingpin 2022 GMC 2500HD Duramax/Alison 4X4 Crew Cab/Standard bed.