|
1. Flush tank til clean. 2. 3. Drop belly and wash the stuff off,. 4. Underneath remove slide valve, remove 6 wires from tank for heater and sensors, unscrew flush fitting from tank. 5. On top remove wall from cargo are to gain access to the pipes. Cut the 3 inch and 1.5 inch pipes To the tank. 6. Back under remove 4 bolts from the rail that holds the tank, slide rail away from tank and drop the tank..7. Replace or repair tank. 8. I used 2 rubber boots with clamps to reinstall the cut pipes from tank to toilet and vent pipes. 9. Reinstall... when installing the belly, use self tapping screws and fender washers.... thats it.. not hard at all...at least on the 3610rl...
|