Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jcurtis934 · 07-31-2018, 10:30 AM

Look like 12vdc batteries in which case they should be connected in parallel. And the battery on the left has its ground wire going somewhere other than the same ground point on the frame structure for some reason. If you want some improvement, I would remove the screw used to hook the right battery negative ground to the frame, grind off paint on the top and bottom, install a bolt with the head from underneath and a lock washer and nut tightened against the frame...then use another nut to attach the cable to this "stud" that you installed.

07-31-2018, 10:30 AM	#2
jcurtis934 Montana Master Join Date: Sep 2013 Location: Pensacola (mail forward service) Posts: 3,198 M.O.C. #13740	Look like 12vdc batteries in which case they should be connected in parallel. And the battery on the left has its ground wire going somewhere other than the same ground point on the frame structure for some reason. If you want some improvement, I would remove the screw used to hook the right battery negative ground to the frame, grind off paint on the top and bottom, install a bolt with the head from underneath and a lock washer and nut tightened against the frame...then use another nut to attach the cable to this "stud" that you installed. __________________ 2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.