Quote:
Originally Posted by wecker1
I need some assistance in sanitizing my fresh water system on a new Montana 3791RD. This is my first time as we just purchased the unit and in following the process outlined in the Owners Manual, it just isn't working. After draining the tank via the low point drains I started adding the 1/4 cup bleach to 1 gal of water solution through the tank vent port as described in the owners manual and could only get 3/4 gallon in before it started backing up as if the port was full?? Any ideas what I may be doing wrong?
Any advice would be greatly appreciated
|
Not sure How to drain the newer unit's fresh water tank older units had a fresh water drain under the tank.
But I can tell you opening the low point drain will not drain the fresh water tank. If their is no Fresh Water drain you will need to turn on your pump and leave low point drains open. But I sure their is a drain under the tank!