[DarMar]

On our 2015 we have two rocker switches at the top right followed by a rotary knob type of switch to the left of the two. Our far right knob has 3 positions and in the center position everything is off dead. When switched to the right it brings on the flame and you are in manual mode. When you are switched to the right you are in remote mode and one uses the remote on ours for on and of only. The second from the right turns on the heat element either the remote mode or the manual mode and needs to be in the on position for any type of heat. The rotary knob is the heat thermostat and I believe we have to rotate it to the right to increase the desired temp.
Hope this helps with your model.