|
from the lippert site:
Fluid Recommendations for Hydraulic Leveling
1.
2.
Operation at air temperatures routinely above 0oC (32oF)
• Dexron 3/Mercon ATF
• Mercon 5 ATF
• Dexron 6 ATF
• PetroBlend (Mason City, IA) PHO 0022S (synthetic group 3 base blend)
• Bellman All Temp 22 (Bremen, IN)
• Or any ATF or hydraulic fluid with a pour point lower than -42oC (-45oF)
Operation at air temperatures routinely below freezing, 0oC (32oF)
• Mobil 1 full synthetic ATF
• Royal Purple full synthetic ATF
• Valvoline full synthetic ATF
• Amzoil full synthetic ATF
• PetroBlend (Mason City, IA) PHO 0022S (synthetic group 3 base blend)
• Bellman All Temp 22 (Bremen, IN)
• Or any ATF or hydraulic fluid with a pour point lower than -42oC (-45oF)
• Multivis (all temperature) iso 22 hydraulic fluid
• Or any ATF or hydraulic fluid (conventional or synthetic) with a pour point lower than -46oC ( -50oF)
3.
Operation at air temperatures routinely below -18oC (0oF)
Kendall Glacial Blue
Benz Oil (Milwaukee, WI) Flomite 530
Or any conventional or synthetic ATF or hydraulic fluid with a pour point less than -57oC ( -70oF) and viscosity less than 2850 cP @ -40oC (-40oF ).
|