Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jcurtis934 · 01-08-2015, 08:32 AM

As I posted earlier on my galley tank leak, the seam between the top lid of the tank and the bottom portion failed...at the seam...over about a length of 8-12 inches. I dropped my tank and bonded the seam ALL the way around. I also had a crack in the bottom of the tank about 1 inch long, as near as I could tell, that was almost directly under where the grey water enters the tank. Thanks to Ozz, I ordered the repair kit and am confident that I won't have another leak in this tank. I also installed an Iseries tank monitor system that utilizes external sensors, so I know exactly what is in all my tanks. John

01-08-2015, 08:32 AM	#19
jcurtis934 Montana Master Join Date: Sep 2013 Location: Pensacola (mail forward service) Posts: 3,198 M.O.C. #13740	As I posted earlier on my galley tank leak, the seam between the top lid of the tank and the bottom portion failed...at the seam...over about a length of 8-12 inches. I dropped my tank and bonded the seam ALL the way around. I also had a crack in the bottom of the tank about 1 inch long, as near as I could tell, that was almost directly under where the grey water enters the tank. Thanks to Ozz, I ordered the repair kit and am confident that I won't have another leak in this tank. I also installed an Iseries tank monitor system that utilizes external sensors, so I know exactly what is in all my tanks. John __________________ 2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.