Phil, On my '06 3400 there is an access panel in the pantry. It is high in the middle set of shelves. I've not had mine off yet but some folks say it is usually not directly over the valve and some cutting may be necessary to reach the valve. If you have no access panel you might have to cut a small hole to approximate the valve and cut a larger one when you find it. You can probably get an access cover of sorts from an RV supply or surplus store in your area. If you look where the pocket door is you might be able to see it and start cutting accordingly. Maybe slide a yardstick or rigid tape measure in there to measure where the valve is. Good luck....Please keep in mind that mine is an '06 and yours may be different. Hope this helps...
|