View Single Post
Old 04-21-2016, 01:45 PM   #3
billhansen19304
Established Member
 
Join Date: Nov 2014
Location: Big Lake
Posts: 16
M.O.C. #15861
Thanks for the reply. Whatever is clobbering the inverter only happens in the split second it takes to go from Boost to Normal. All good after the transition. I'll re-look at the connections.
Thanks again.
Quote:
quote:Originally posted by rohrmann

You may want to check the 12 volt connections, as the specs on the inverter indicates it will shut down when the input voltage drops to 10 volts, so either the inverter has a problem or like I said, you may have a poor connection feeding the inverter. If the converter was bad, you would see a dramatic drop in brightness in your lighting when it dropped voltage that far.
billhansen19304 is offline   Reply With Quote