[jeffba]

Originally Posted by artfuldodger

I have fitted the same cord reel as Montana uses on my 2017 3720. I removed the fender(very easy ) and mounted the unit on the frame just like the factory does. I disconnected the 50 amp. line and reconnected the line to the electric block. This was tricky only because the wire is so stiff. Whole was cut in the fender while off the rig, for the switch , which comes with hook up instructions. The power for the rail required a wire from breaker box to the reel. Works great and looks like it was factory installed.

X2 on the pix please and part numbers if you have them