|
Sorry that I read your post as non self priming. If the pump you put in has a mesh filter attached, you want to make sure the o ring is installed and filter hand tight. If the pump has push in fittings that latch when pushed in, make sure that they are latched. As people have said, it is the pump inlet that will be causing the issue. If screw in fittings, it may be that the inlet one has a defective thread allowing air in.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|