[Phil P]

Hi

Here are the products I have used.


You apply this with a sponge if it runs down the face of the vinyl you are using too much. This works as advertised but because Keystone uses a very thin vinyl you may have a problem getting the vinyl to pull off in a sheet.


This works well using a sponge again try to keep it from running down the wall. The paint on some of the metal skirting will come off if this gets on it.


These are the sponges I use.


This is called a “stripe eraser” it is marked for use in an air tool I use it in a ¼ inch electric drill it does the job. I use it for all graphics that are in a location where chemical run down will contaminate my slide seals and caulking.

Phil P