Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

kc8lvy · 08-17-2019, 05:14 PM

Here are the pics that you wanted. Pic 1 after you pop off the vent cover remove the 4 screws. Pic 2 as you can see these are about 1 1/2" deep(Too Deep). As you can see in Pic 3 the old tape had a hole in it. Pic 4 is the silver tape that I used. Pic 5 I cut strips that were about 2 1/2" long. Pic 6 is after I put all the new tape up. From there install the new vents.

08-17-2019, 05:14 PM	#50
kc8lvy Seasoned Camper Join Date: May 2017 Location: Naples Posts: 91 M.O.C. #19861	Here are the pics that you wanted. Pic 1 after you pop off the vent cover remove the 4 screws. Pic 2 as you can see these are about 1 1/2" deep(Too Deep). As you can see in Pic 3 the old tape had a hole in it. Pic 4 is the silver tape that I used. Pic 5 I cut strips that were about 2 1/2" long. Pic 6 is after I put all the new tape up. From there install the new vents. Attached Thumbnails __________________ 2017 Montana 3820 FK 2004 Dodge Ram 2500 2009 Harley Davidson Ultra Classic