|
The problem will be that the outlets for the same circuit breakers are run in series. This means from the circuit breaker they run the wire to the first outlet they come to, then they run a wire from that outlet to the next closest outlet and so on until they think they are done.
The circuit breaker for the A/C wire runs to the ceiling where the A/C would be installed. Same with the W/D's circuit breaker and the wire runs to the closet or wherever your W/D connection is located.
Running the wires through the insulated walls of the rig would be very difficult, but if you have all the tools, fishtape, and electrical savvy, then give it a go. You might do better to put circuit breakers into the spare positions (besides the unused W/D and A/C in my rig I have a couple empty spots) and run new wire (somehow) to where you need to add outlets. My power panel has at least two spare unoccupied positions to install new circuit breakers and wire, if so inclined.
|