|
one issue is the floor of the garage is high & makes for a steep angle, when I load a bike I raise the front of the camper up to lessen it a bit. It really does help to have a spotter & try to always load or unload when it is dry, that coating gets real slippery. I thought about a rubber mat, but if its not secure it could spin out. I use a front wheel stand & a little momentum, dont stop half way up as you will get high centered & go up & into the stand. If you are using the stand you should make sure it is secured so it doesn't move. What I do is strap it to the tie downs since I don't want anything permanent in the way. It takes some practice & having someone to help is a big plus the first few times.
|