Quote:
Originally Posted by ChuckS
On most rigs made within the last decade or so if there are two air conditioner units the actual temp sensors are remote mounted in two separate locations within the RV... usually LR and BR areas...
Zone 1 sensor will detect both for air conditioner and furnace ... Zone 2 is only for AC in BR area...
|
I had issue with zone 1 ac and heat pump worked great furnace cycled every 2-4 minutes after reaching temp. Inside the sensor dome on zone one is two wires one for AC and one for furnace. My furnace wire was in wall cavity, put both outside wall, foamed opening now everything works correctly