Quote:
Originally Posted by rohrmann
I replaced all of my top slide seals and also the top bulb seals last year. I ordered from www.trekwood.com. On the site, you select make, model, year, and type of product you are wanting, in this case rubber. They don't have a photo of the part, just a drawing. It will be LTI #546, and is $3.42 per foot, and is called OFFSET FLAP TPE. There will be a screw on each end of the rubber that you need to remove, then you just pull the rubber down from the flange. Cut the new rubber exactly the same length, I used side cutters to cut through the embedded wire. Install the new rubber flap to the flange, it will lock on to the flange. Then reinstall the screws. I changed all of ours out in about 45 minutes. |
Good info, thanks! 
__________________
2010 3150RL
LevelUp, Dual 6 volt batteries, Progressive Industries EMS HW50C, Honda EU2000i Generator, Bridgestone Duravis R250 tires, Torklift Glowstep Revolution Stairs, LED Tail lights
2015 RAM 3500 Laramie SRW LB CC Cummins 6.7L Aisin Trans B&W RVK3600
|