Quote:
Originally Posted by scottz
Ok, I'm confused now. I just got off the phone with etrailer. I wanted to order the Kodiak 13" kit and upgrade to 9/16" studs. I know this takes a larger outer bearing, but I was told they could not tell me the proper bearings to order unless I pulled one of my wheels apart and got a number off the existing bearings and/or took a measurement with calipers. I told her I had Dexter 7000 lb axles and didn't that tell them what size spindles I had. She said no, that you could never tell which spindles they would put on the axle.
I seems odd, since you can go to their page for that hub and it tells you which bearing it takes, but has me second guessing now.
https://www.etrailer.com/Trailer-Bra...1337-9DAC.html
I don't want to buy my bearings from them anyway since they don't carry Timken, but I need to know what size to order.
I'm going to call again tomorrow and talk to a different person, but now thinking different vendor.
Thoughts? |
Here is my order from Rock auto for the bearings and races.
The numbers should cross reference.
TIMKEN 25580 Inner bearing
TIMKEN 02420. Outer race
TIMKEN 02475 Outer bearing
TIMKEN 25520. Inner Race