Quote:
Originally Posted by Texan
I had the wet bolt kit on my 2014 3402rl. One of my bolts broke and shifted my axle back which caused my right rear tire to wear prematurely. This caused me to have the I.S. installed at the factory. If you have the wet bolt kit then you need to purchase a 5/8 grade 8 bolt,locking nut and 2 flat washers. i believe bolt is 4 1/2 inches long, measure to be sure, as a back-up when traveling . I found mine broken before a trip when inspecting and had to buy one as a temporary because the dealer had to order me a wet bolt as they were out of stock. I suspect the wet bolts are not grade 8 but don't know for sure. Just put a little grease on the bolt and you are good to go.
|
I put 2 of the bolts I replaced along with bushings as spares in my possible box. Will keep a eye on the wet bolts Thanks