Quote:
Originally Posted by jimcol
If you have power at the element the breaker and the switch and the reset are all ok. Start looking for an open neutral. First place I would check is in the breaker box as many have reported not tight neutral connections right from the factory. If it was a little loose leaving the factory it will only get looser with use.
|
I’m going to chase the neutral from the water heater to point of termation.
Thanks
__________________
2018 Ram 3500 MegaCab 4x4 Aisin, 4:10 Gears
Titan 50 Gal Tank, Air Lift Wireless Bags
2017 3160 RL
|