|
Congratulations on your new unit. I hope you have many years of trouble free fun.
John Kohl was correct. Your wall thermostat has two zones. To get the LR A/C on, switch to zone #1, select A/C and set your temp and fan speed. You will hear the fan come on but it takes about two minutes before the compressor turns on. This is to save the compressor from short cycling in the event of poor power or a power outage.
If you wish to run the second A/C go to zone two and repeat the procedure used for zone one.
A couple of hints. If you are in the LR and don't need both A/C's running, just run the bedroom A/C. It is ducted into the LR and will be much quieter and when you go to bed change over and run the LR unit.
Also don't try to get the furnace to turn on (furnace is on zone one)if you have the zone two A/C active (running or not)
Happy trails,
|