Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post - Spring Hanger

richfaa · 11-10-2009, 02:33 PM

We went to the Mr Ryde IS system this September at the fall rally. It was at considerable expense but we felt that the way we use the 3400 justified it. We also learned a lot about welds while there and now realize the skills required in a good weld. We never did feel the suspension was adequate for the heavy use some of use put these things to.Even for normal/average use the wet bolt kit, cross bracing and strengthening the brackets is a real good idea. These are large heavy campers as we found out at the rally weigh in.

11-10-2009, 02:33 PM	#28
richfaa Montana Master Join Date: Jan 2005 Location: North Ridgeville Posts: 20,229 M.O.C. #2839	We went to the Mr Ryde IS system this September at the fall rally. It was at considerable expense but we felt that the way we use the 3400 justified it. We also learned a lot about welds while there and now realize the skills required in a good weld. We never did feel the suspension was adequate for the heavy use some of use put these things to.Even for normal/average use the wet bolt kit, cross bracing and strengthening the brackets is a real good idea. These are large heavy campers as we found out at the rally weigh in.