|
I'm wondering if I read that correctly. Did you say you have 4 switches on the inside for the slides, and 4 on the outside, plut one on the remote? I think you meant 1 rocker switch on the inside of the coach, 4 on the outside, and and "in/out" switch on the remote which controls the landing gear, stabelizer jacks and the rooms. Bingo is correct as the 4 switches on the outside should be marked with which room that particular switch controls. If you turn them all on, then operating the 1 rocker switch inside should open/close the rooms one at a time starting with the bed. If for some reason the 4 outside switches are not labelled, then you can turn on 1 at a time, and use your remote to see what room works, then use a fine point to label that switch, etc.
Hope this helps.
|