3 directions of movement. Front to back-I use sissor type wheel chocks. Up and down-I use 4 cheapie jack stands from WM, in front of and behind the wheels. Side to side-I made rods similar to JT's out of 3/4" and 1/2" conduit. 1/2" slides into 3/4", I welded a nut on the 3/4" to accept a bolt to tighten the 1/2" inside the 3/4" and they are mounted between the sissor jacks front & rear.
The jack stands need to be tightened once in a while but for the most part, the trailer is pretty solid.
Square dancing is a no-no!
BTW, I have a TT, not a 5th Wheel!
|