|
My 2014 has the RM1350 fridge. No temp fluctuations. I’d start by checking the door seals and see if there is a gap anywhere... pay close attention to the lower seal area. A dollar bill should stay tight in the door seal with doors closed ... if not you need to address that issue first.
I’d also remove the outside upper and lower vent covers for the fridge and blow that area out with an air compressor. Use low pressure..about 25 psi...gently blow out the condenser coil area located at the upper vent.
Make sure the baffle is still in position at the upper vent area.
Mine stays around 34 in 100 degree temps
|