|
Only two problems tha5 I’m aware of will cause tire to wear on inside rig only...
Camber of that axle is not in spec...they come pre bent from factory with X amount of camber
If the wheel bearing on that wheel has an issue ...not properly torqued or greased it will also cause this issue..
Also you could take a laser level ... very inexpensive.. and place at center of that axle with laser beam resting just on bottom edge of axle...
Look at the laser beam from side to side and see if it hits the bottom edge across from center out at each wheel... if camber is way out you MAY see a variance but not certain.
|