|
I found that I get water into the edges of the coroplast, then it leaks into the bottom wherever the bottom is cut...like around the galley sink drain pipe that connects into the sewer outlet as well as where the solid rod for the galley grey tank drain. I sealed the edges with tape. Now that morryde put the i.s. on, I need to find time to crawl under and check the bottom to make sure new avenues aren't present.
__________________
2012 F350 6.7 L dually, 2013 3800RE with 6 pt leveling, Sumitomo 17.5" load range h tires, Samsung 18 cu ft residential fridge, 8k Morryde I.S. with disc brakes. Full timing since 2012.
|