|
Ok, I think things are looking ok. I used the instructions "Upper Deck Flex Measurement" that Jason suggested. I couldn't measure all the way down to the bottom where the legs are due to the bed of the truck, but I was able to measure from about six inches in from each corner down to about a foot up from the bottom and the measurements did not change with weigh on the truck. I do see about 3/8" movement from the top of the hitch to the bottom of the nose (there is only about an inch gap there with no weight on it). So I'm thinking I'm ok.
What do you guys think?
__________________
2011 3150RL
|