|
jcurtis934 has a very valid point on the turning of the tanks on to fast. Also, if you just filled your tanks and put them in place the tanks internal cut-off valve may not be open or is open just enough to allow enough propane to flow to get the water heater to light and the frig to light but not enough pressure to let the stove also light. Whenever I fill my tank/s I turn them upside down and tap them on the ground a light tap and then slowly turn them upright again and set them into their respective spot. Then, if I've filled both tanks--which is very rare, I SLOWLY turn on one tank and I normally have propane to all appliances. I've never had the kinked propane line in the slide but there is always a first time experience there also. Let us know what you come up with.
|