Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

jackel1959 · 04-09-2011, 07:29 AM

Ken,
Thanks for the quick reply!!!! That is just the info I needed and a photo is worth a thousand words

I will stay with the stock system for the time being though. I had removed the housing on one of the speakers too in order to make sure I would not drill through the speaker when attaching the mounting bracket. I had thought about using an "L" bracket as you did or manufacturing a bracket from some scrap aluminum. I will try to remember to post a few photos when I am complete. Thanks again.

r,
Jack

04-09-2011, 07:29 AM	#7
jackel1959 Montana Master Join Date: Nov 2004 Location: Oak Harbor Posts: 1,530 M.O.C. #2471	Ken, Thanks for the quick reply!!!! That is just the info I needed and a photo is worth a thousand words I will stay with the stock system for the time being though. I had removed the housing on one of the speakers too in order to make sure I would not drill through the speaker when attaching the mounting bracket. I had thought about using an "L" bracket as you did or manufacturing a bracket from some scrap aluminum. I will try to remember to post a few photos when I am complete. Thanks again. r, Jack __________________ Previous:2004 Mountaineer 325FKBS,2010 Montana 3455SA Now:2018 Bighorn 3575EL (SOB's ) Res. Fridge,W/D,Disc Brakes,Water Softener,Dish Tailgater PRO,LioN Batts, several mods. 2021 RAM 3500 Laramie...."LOADED", 4x4, SB H.O. 6.7L, Aisin Trans, PullRite Super Glide Hitch, 52 Gallon Titan Fuel Tank.