I installed mine last month. Read the destructions carefully. If I had it to do over I would have drilled the hole a little differntly. My mark came out overlapping one of the rivets that hold on the end cap. I should have drilled it to the side (I think there is enough slack), or drilled out the rivet. Instead I drilled on the mark. It works but the hole is larger than it should be (because the rivet fell out) and there is a little more play in the system then I would like. I may replace the end cap this winter. Live and learn.
Dennis & Leona
http://tinypic.com/fxv09e.jpg
05 3295RK
05 F350 King Ranch, Long Box, Crew Cab, 4X4, PSD, 4 in. Exhaust, X-Monitor Guages
Reese 20K with Bed Saver