Montana Owners Club - Keystone Montana 5th Wheel Forum - View Single Post

Theunz · 08-16-2017, 07:32 AM

I found that getting the valve back in required more room than removing it. I used a rachet strap to pull mine apart. As mentioned you only need about 1/4 inch. Just don't get heavy handed, there is not much flex to be had! Mike

08-16-2017, 07:32 AM	#9
Theunz Montana Master Join Date: Mar 2016 Location: Catoosa Posts: 780 M.O.C. #18384	I found that getting the valve back in required more room than removing it. I used a rachet strap to pull mine apart. As mentioned you only need about 1/4 inch. Just don't get heavy handed, there is not much flex to be had! Mike