View Single Post
Old 11-23-2019, 10:38 AM   #4
ChuckS
Montana Master
 
Join Date: Dec 2017
Location: Mountain Home
Posts: 831
M.O.C. #20949
If mid jack and rear on same side are creeping down it can only be caused by one of two issues.

The mid/rear levelers operate in tandem on each side. Each side is separate from each other

Either 1 if the mid/rear levelers is bypassing internally or the solenoid valve for that respective valve is not closed all the way

There is a manual port screw on the solenoid used for manual operation that may not be fully tight. This can also let the solenoid bypass fluid.

Use 1/8 inch Allen wrench and lightly snug it
ChuckS is offline   Reply With Quote