|
Jeff, maybe your techs cut the coroplast but ours here removed all of them and so did the service tech down in AZ when I had the gray tank replaced.
Since this picture and Scott's project was back in April of 2018, I think he has learned a lot since then when it comes to the underbelly. LOL The nails are put in with a high pressure air gun and nailed right through the frame. I'm lucky and all of the fasteners on our 2013 rig were self-tapping screws and a lot easier to remove and replace. I have put fender washers on the screws the we put them back on or in so the screw did not go through the coroplast belly.
|