View Single Post
Old 07-09-2016, 10:46 AM   #5
Carl n Susan
Site Team
 
Carl n Susan's Avatar
 
Join Date: Oct 2005
Location: Carmichael - CA
Posts: 7,369
M.O.C. #4831
Quote:
quote:Originally posted by MARK A

Quote:
quote:Originally posted by bigskyjimmy

Both my 2012 and my 2015 do that ONLY when I am doing the black water flush and they stop dripping when I am finished so I do not worry about it,one of these days I will put new valves in.......Or Not
That concerns me a little. Wouldn't you think the two systems should be completely isolated from each other? The flush system affecting the fresh water system seems odd?

Mark
I have to agree. The systems are separate. I would suspect a leak in the flusher line/system in the convenience center area. The water is reaching the drain lines and flowing down the outside of the line until it drips on the ground. If one put a cork or rubber plug in the end of the low point drain lines, ran the flusher, and still had dripping, it has to be external to the low point drain system. And when you remove the cork/plug there will not be liquid emerging proving the valve(s) are not leaking either.
__________________
Carl (n Susan)
There is more to life than fuel mileage.
2012 Montana 3700RL Big Sky Package towed by a 2015 Ford F350 6.7L PSD 4WD CC LWB

Carl n Susan is offline   Reply With Quote